YT4-6A hydraulic Push the slip unit introduction

YT4-6 a hydraulic push slip structure for the outer wall of cylinder block direction respectively fixed with the front and the rear hydraulic valve before and after the hydraulic valve, between the valve fixed on opposite sides of the outer wall of cylinder is equipped with positioning shaft; Cylinder shaft with location is located in the fixed seat vertical long hole; Fixed fixed with the bottom of the floor, floor near the piston rod end up; and the cock Fixed at the top of the tower with a choke seat, on top of the upper trough structure lean back, and with the horizontal plane into 20 ° to 24 ° Angle. The utility model design is reasonable, the separation of filler and cylinder hydraulic fluid injection gun, pushing sneak mobile convenience, adjustable on both ends of the cylinder body; When the piston rod can be connected to the block coal board normal contact, prolong the service life of equipment.

YT4-6A hydraulic Push the slip unit parameter

YT4-6A hydraulic Push the slip unit picture

Leave a message

Your Name*

E-mail*

Company Name*

Your Inquiry*

Security code*